ALUMINUM ALLOY - Page 4 - ZHEJIANG NINGBO HEXIN FOCUSED ON LOW-PRESSURE CASTING, GRAVITY CASTING, DIE CASTING MOULD MANUFACTURING, ALUMINUM CASTING FACTORY

Aluminum castings for automotive manifolds

2024-08-17

Our automotive manifold aluminum castings are made of high-precision aluminum alloy material through fine casting process, which has excellent high temperature resistance, corrosion resistance and good mechanical properties. This product is widely used in the intake and exhaust manifolds of automobile engine systems, which can effectively improve the overall performance and service life of the engine. The lightweight design of aluminum castings not only reduces the weight of the whole vehicle and improves fuel efficiency, but also has high fatigue and wear resistance. Through strict quality control and multiple testing procedures, we ensure the stability and consistency of each product to meet the demand for high-performance and high-precision parts for various vehicle models. Whether in high temperature environment or long time operation, manifold aluminum castings can maintain excellent working performance, which is a key component in the powertrain of modern automobiles. Product Name:...

Bus Camera Housing

2024-08-16

The bus camera housing is carefully made of high-strength metal materials such as aluminum alloy or zinc alloy, integrating waterproof, dustproof, shockproof and anti-corrosion properties. Its design is not only beautiful and generous, but also fully considered the convenience of installation and maintenance, equipped with special mounting brackets and adjustment devices, easily adjust the angle and position of the camera, to ensure that the monitoring of no dead ends. At the same time, it supports high-definition night vision and wide-angle lenses, providing clear and comprehensive surveillance images even in low light or wide spaces. The housing also has excellent heat dissipation and anti-interference ability, which is an indispensable and important part of vehicle security monitoring to ensure long-term stable operation of the camera in complex environments. Product name: Aluminum die-casting bus/coach/caravan camera housing Installation location: camera assembly housing Should...

Water pipe connectors

2024-08-14

Automotive Aluminum Engine Water Hose Connector is a key accessory designed for automotive engine cooling system, which is mainly used to connect the engine with the water hose in the cooling system to ensure that the engine can be efficiently and safely maintained in the optimal operating temperature range. The connector is precisely designed to efficiently circulate coolant between the engine, radiator and other related components to ensure the cooling effect of the engine and prevent overheating. Product Name:Automotive Engine Coolant Water Hose Connector Housing Installation Location:Automotive Engine Radiator Aluminum alloy, as a material, has light weight, high strength, excellent corrosion resistance, and good thermal conductivity, which makes the aluminum alloy water hose connector work stably even under high temperature and high pressure environments, and has a long service life. In addition, the advantages of aluminum alloy also include...

Difference between low pressure casting and gravity casting

2024-08-05

Low-pressure casting and gravity casting are aluminum alloy casting process, low-pressure casting is also known as anti-gravity casting, low-pressure casting. Low pressure casting is also known as anti-gravity casting, low pressure casting. The difference between it and gravity casting is mainly reflected in the following aspects. The difference between the casting principle of operation: the difference between the casting principle of operation: low pressure casting is also known as anti-gravity low pressure casting, so the name of the casting method is through the gas pressure against gravity casting molding, as shown in the figure on the right: through the sealed crucible injected into the gas (usually 0.06 ~ 0.15MPa)), the aluminum liquid in the role of pressure through the middle of the pipeline, the product for the molding of the casting, holding pressure for a certain period of time, the aluminum water cooled in the mold cavity, the aluminum water cooled in the mold cavity. Aluminum water in the mold cavity cooling molding, through the discharge of gas pressure, open the mold, remove the product. Gravity casting refers to the casting of aluminum water through the action of gravity → filling → solidification and contraction → casting, this...

Low pressure casting process

2024-08-05

Low pressure casting is a method of forming castings by filling them with liquid metal under pressure. It is called low-pressure die casting because it uses very low pressure. The process flow (see Figure 1) is: in the sealed crucible (or sealed drill), into the dry compressed air, liquid metal 2 in the gas pressure, along the ascending tube 4 rise, through the gate 5 smooth into the cavity 8, keep the crucible recreational hydraulic pressure until the casting is completely solidified, and then relieve the hydraulic pressure, so that the open tube is not solidified liquid metal flow crucible collapsed, and then open the casting through the cylinder 12. The process specification of low pressure casting includes charging, pressurizing, preheating temperature, injection temperature, casting coating, etc. (1) Charging and pressurizing Lifting pressure refers to the pressure required when the level of the metal liquid rises to the mouth of the stream. The rise of the metal liquid in the ascending tube should be as slow as possible, in favor of the cavity gas...

Aluminum die casting mold design and manufacturing

2024-08-05

A, die-casting molding technology introduction pressure casting referred to as die-casting, is the use of die-casting machine pressure will alloy molten liquid at a certain speed filled with in accordance with certain parts structure and process requirements design and through the precision manufacturing of the mold cavity, and alloy molten liquid to keep under a certain pressure, under the action of the mold cavity, in the mold cooled and solidified and molded a kind of high efficiency, high efficiency of the precision casting technology. B, die-casting molding technology characteristics and scope of application 1, die-casting molding technology features high pressure, high speed is die-casting liquid or semi-liquid metal filling molding process of the two main features, but also die-casting molding technology and other casting method is the most fundamental difference. &...

Composition and design of aluminum die casting mold

2024-08-05

Aluminum die casting is a highly efficient manufacturing process commonly used for mass production of precision aluminum alloy castings. Compared with traditional casting methods, aluminum die casting molds can achieve higher production efficiency and finer casting dimensions. Aluminum die casting mold design and composition directly affects the quality of castings, production cycle and mold life, therefore, the design of a high-performance aluminum die casting mold is critical. Aluminum die casting die refers to the tool used to manufacture aluminum alloy high pressure castings, usually consists of die kernel, die seat, die core, cooling device, sliding device, ejector device and other components. The following is a detailed analysis of aluminum die casting die: the main components of aluminum die casting die aluminum die casting die design key considerations aluminum die casting die classification aluminum die casting die and die casting machine can be divided into: Horizontal cold chamber die casting...

Aluminum oil sump

2024-08-05

What is an oil pan? The oil pan is located in the lower part of the engine's crankcase, also known as the lower crankcase. Used to seal the crankcase, collect the engine friction generated by the lubricating oil back to prevent outside dust impurities into the lubricating oil. Classification of the oil pan: common have these kinds of oil pan Plastic oil pan Plastic oil pan refers to the oil pan material for engineering plastics, the use of injection mold processing technology manufacturing, this material is manufactured by the oil pan more lightweight and thin quality, design freedom is relatively high, relatively inexpensive, more convenient installation. Has a certain degree of toughness. However, the high temperature resistance and corrosion resistance of the plastic oil pan is relatively poor, the life is relatively short, suitable for low working temperature, low frequency of use, the weight requirements of the environment. Aluminum alloy oil pan Aluminum alloy oil pan due to the use of...

Electric iron

2024-08-05

What is an electric iron? Iron is a tool for smoothing clothes and fabrics, it is one of the common household appliances in modern times, it utilizes an electric heating element to heat up the soleplate and smoothes out wrinkles on the fabric through high temperature and pressure, the iron is used to remove wrinkles on clothes products. How does an iron work? The heating material inside the iron, such as nickel-chromium alloy wire, generates heat when current is passed through the electric heating element. This heat is transferred to the soleplate, raising the temperature of the soleplate. The soleplate is usually made of metal, such as aluminum alloy iron, copper alloy iron, etc., because metal has good thermal conductivity, can quickly and evenly transfer heat. When the temperature of the soleplate rises to a certain level, the clothes are placed on the soleplate, and the heat of the soleplate is transferred to the clothes, making the fibers of the clothes soft from...